Keeping used motorcycle parts as good as new

>while the tires, engine, and inner fenders are the
rough areas. I use different wash mitts and sponges
Even with regular maintenance and upkeep, ourfor each area to keep dirt and grime away from the
motorcycles tend to get used and subjected tosensitive areas. This way, scratching would be
different elements in the environment. To keep usedavoided.
motorcycle parts as good as the day when we firstUse also a gentle stream of water when rinsing,
bought them, regular washing and rinsing will do therather than high water pressure that comes from the
trick.hose. The high pressure of water will cause dirt to
But you should take note how you do your washing.grind further into the paint, causing scratches along
You might scratch parts of your motorcycle.with other worse problems. And remember to use
Top Rule: Avoid scratches.generous amounts of water when rinsing. Dirt that
Scratches are the biggest enemy of any bike's finish.causes scratch will easily float away with enough
The secret of keeping your used motorcycle partswater used.
as good as new is to avoid scratches in yourWhen washing your bikeĀ…
motorcycle. Dirt and grime when rubbed in whileUse lots of water, but without the high pressure.
washing or drying, act as sandpaper and will definitelyTotally avoid using pressure washers. Instead let the
dull the brilliance of your bike's paint.water flow freely by detaching the nozzle from the
To avoid scratching your bike, first, you need tohose.
remember that anything that comes in contact withAlong with the generous amount of water, use
your motorcycle's finish should be made of softdetergents designed specifically for motorcycle
material. Take care that no harsh or rough surfaceswashing. Ordinary detergent tends to remove the
will be able to connect with any part of yourwax that we want to try to keep. Simply mix the
motorcycle. Zippers are the worst offenders.detergent according to the directions and go for it.
Use only clean, freshly washed cotton cloths orJust make sure you rinse each section soon after
towels to dry your bike after washing. When youapplying the detergent so that no soap film will
need to put on any application to make your bikedevelop. It is difficult to get rid of the soap film when
shine, again use the clean cotton cloths and towels.it dries up.
Rinse thoroughly the sponges or wash mitts, as wellAfter washing, rinse, rinse, and rinse some more.
as the bucket, before and after washing your bike toRinse everywhere. Every nook and cranny should be
remove any dirt or grime.rinsed of soap.
One of the best advice I got from a usedLastly, wash your motorcycle without bright sunlight.
motorcycle parts site was to separate my bike'sSoap suds can easily dry from the heat. Ideal time of
areas into normal and rough areas when washing. Ithe day would be in the late afternoon or early
usually consider the painted surfaces as normal areas,morning when the sun is not so strong.